Electron beam pretreatment of sewage sludge before anaerobic digestion

The pretreatment of waste-activated sludge (WAS) by electron beam irradiation was studied in order to improve anaerobic sludge digestion. The irradiation dose of the electron beam was varied from 0.5 to 10 kGy. Batch and continuous-flow stirred tank reactors (CFSTRs) were operated to evaluate the effect of the electron beam pretreatment on anaerobic sludge digestion. Approximately 30–52% of the total chemical oxygen demand (COD) content of the WAS was solubilized within 24 h after electron beam irradiation. A large quantity of soluble COD, protein, and carbohydrates leached out from cell ruptures caused by the electron beam irradiation. Volatile fatty acids production from the irradiated sludge was approx 90% higher than that of the unirradiated sludge. The degradation of irradiated sewage sludge was described by two distinct first-order decay rates (k ₁ and k ₂). Most initial decay reaction accelerated within 10 d, with an average k ₁ of 0.06/d for sewage sludge irradiated at all dosages. The mean values for the long-term batch first-order decay coefficient (k ₂) were 0.025/d for irradiated sewage sludge and 0.007/d for unirradiated sludge. Volatile solids removal efficiency of the control reactor fed with unirradiated sewage sludge at a hydraulic retention time (HRT) of 20 d was almost the same as that of the CFSTRs fed with irradiated sludge at an HRT of 10 d. Therefore, disintegration of sewage sludge cells using electron beam pretreatment could reduce the reactor solid retention time by half.     

A practical approach to the implementation of autoverify

Autoverification is a process in which computer software will automatically evaluate laboratory test results, verify result integrity, and then release the results to the hospital interface without any technologist intervention. Autoverify release criteria are user defined and can be customized. The process of developing, implementing, and monitoring autoverify is achievable for most test results in laboratory medicine. The use of autoverification will improve result quality, increase revenue, and create faster turn-around times. All of this put together will ultimately lead to improved customer satisfaction. Computers and autoverification are survival tools in the competitive market of laboratory diagnostics services.Presented at the 8th Conference on Quality in the Spotlight, 17–18 March 2003, Antwerp, Belgium     

Tamarindus indica mucilage and its acrylamide-grafted copolymer as flocculants for removal of dyes

The application of Tamarindus indica seed mucilage (Tam), a food grade polysaccharide, and its acrylamide grafted copolymer as flocculants was assessed for the first time for removal of various types of dyes from model textile wastewater containing azo, basic, and reactive dyes. Acrylamide grafted T. indica mucilage (Tam-g-PAM) was obtained by ceric ion initiated polymerization technique. A series of contact time experiments were conducted to assess the system variables such as concentrations of mucilage and dyes and pH. These flocculants reduce the dye concentration by flocculation and settling. The grafted copolymer, Tam-g-PAM showed better results for dye removal. The optimal flocculant concentration, which was required to effect flocculation, was independent of dye concentration within the range examined. Both the flocculants performed better for removal of azo dyes than for reactive and basic dyes.     

Detection of ethanol in human body fluids by headspace solid-phase micro extraction (SPME)/capillary gas chromatography

Summary Ethanol has been found extractable from human whole blood and urine samples by headspace solid-phase micro extraction (SPME) with a Carbowax/divinylbenzene-coated fiber. After heating a vial containing the body fluid sample with ethanol, and isobutanol as internal standard (IS) at 70°C in the presence of (NH₄)₂SO₄, a Carbowax/divinylbenzene-coated SPME fiber was exposed in the headspace of the vial to allow adsorption of the compounds. The fiber needle was then injected into a middle-bore capillary gas chromatography (GC) port. The headspace SPME-GC gave intense peaks for both compounds; a small amount of background noises appeared, but did not interfere with the detection of the compounds. Recoveries of ethanol and IS were 0.049 and 0.026% for whole blood, respectively, and 0.054 and 0.085% for urine, respectively. The calibration curves for ethanol showed excellent linearity in the range of 80–5000 mg L^–1 for whole blood and 40–5000 mg L^–1 for urine; the detection limits for both samples were 20 and 10 mg L^–1, respectively. The data on actual determination of ethanol after the drinking of beer are also presented for two subjects.     

新型微填充柱－毛细管柱二维色谱系统过程的动力学研究

从色谱动力学角度对新型微填充柱－毛细管柱二维色谱系统过程中双柱条件与流出曲线及柱效之间的依赖关系加以系统研究。结果表明：由于双柱条件之间存在关联，双柱系统流出曲线特征与单柱系统存在一定的差异，流出曲线一阶矩和二、三阶中心矩以及双柱系统的柱效皆由预柱和主柱条件综合确定。     

近5年化学奥林匹克(初赛)试题的分析及建议

从化学核心素养出发，分析近5年化学奥林匹克（初赛）试题考查的学生知识水平、能力水平、素养水平，并针对培养中学生核心素养的教学实践提出建议。     

微视频技术在基础化学实验教学中的实践应用

以高校基础化学实验"从海带中提取碘""三草酸合铁（Ⅲ）酸钾的制备"为例，分别探讨了微视频技术在化学基本操作实验和综合设计型实验中的具体应用；此外，举例说明利用Flash软件制作的虚拟微视频可以在仪器分析实验中清晰地再现仪器真实操作中的每一个步骤，弥补了学生在实验前无法实际操作仪器的不足。实践证明，微视频技术的应用，丰富了基础化学实验教学模式，增强了学生自主学习的能力和动手能力，提高了实验成功率和实验教学效果。     

生物检材中乌头类生物碱的检验

 用薄层 (TLC)、高效液相 光电二极管阵列检测器 (HPLC/DAD)、动物实验等方法对生物检材中乌头生物碱进行检验 ,并对这些方法进行比较。结果发现 ,TLC法为此类药物检验筛选的首选方法 ,最小检出量为 0 3μg。在进行HPLC检测时 ,以乌头生物碱的特征紫外吸收光谱和动物实验结果为重要的定性手段 ,其特征吸收波长为 (2 2 8± 2 )nm和 (2 75± 2 )nm。乌头生物碱在 2mg/L～ 5 0mg/L时其峰面积与质量浓度有很好的线性 ,相关系数为 0 9996。经实际案件证明 ,方法准确、灵敏 ,可用于生物检材中乌头类生物碱的检验。     

Design of experimental routes and data processing for the determination of the depth-distribution of energy in real solids

No adequate thermodynamic definition of non-equilibrated solids is available at present. In this paper a method is suggested for the energetic characterization of solids by estimation of the distribution of the differential molar internal energies — as they appear during the breakdown of sample e.g. by chemical reaction, i.e. the ‘depth distribution of differential energies’ (DDE) of samples. Thermodynamic considerations are presented for approximating this quantity — and experimental possibilities proposed to attain the needed input information by thermoanalytical methods. Application of the suggested procedure is supposed to contribute to the better understanding of structure — energy — reactivity relations in real solids.     

农残水平测试中数据多态性分析及指定值估计研究

对全国农残水平测试中毒死蜱、氯氰菊酯数据进行统计分析,在数据统计分布特征研究基础上,使用内核密度估计进行数据多态性分析,使用bootstrap模拟取样法对数据样本值重复取样,以获得稳健的水平测试样品待测物含量代表值估计、标准误差及置信区间描述,证明以bootstrap模拟取样法获取的均值与标准偏差作为有限单次样本代表值是合理、有效的,解决了四分位稳健统计方法对非正态多态分布代表值估计不稳定问题及取样理论中取样样本数限制的瓶颈,为能力验证计划指定值的获取提供了一种新方法。